China Factory wholesale Vacuum Pump Oil - Jar Automatic Blow Molding Machine – Joysun Suppliers and manufacturers

Factory wholesale Vacuum Pump Oil - Jar Automatic Blow Molding Machine – Joysun

Short Description:

With the capacity of 800 per hour, Jar automatic blow molding machine can blow the bottles of the volume 0.2-5L, and the neck diameter from Ф28 to Ф130. Features: Automatic blow molding machine is designed uniquely with the innovative and reasonable mechanical structure. During the whole producing process, the bottles mouth faces down to avoid being overheated in the process of heating, which extends the application widely used. We adopt the cheap compressed air as driving power, applying th...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Water Ring Vacuum Pump , Injection Machine Plastic , Oil Lubricated Rotary Vane Vacuum Pumps , We can give you the most competitive prices and high quality, because we are much more PROFESSIONAL! So please do not hesitate to contact us.

Factory wholesale Vacuum Pump Oil - Jar Automatic Blow Molding Machine – Joysun Detail:

With the capacity of 800 per hour, Jar automatic blow molding machine can blow the bottles of the volume 0.2-5L, and the neck diameter from Ф28 to Ф130.

Features:

Automatic blow molding machine is designed uniquely with the innovative and reasonable mechanical structure. During the whole producing process, the bottles mouth faces down to avoid being overheated in the process of heating, which extends the application widely used. We adopt the cheap compressed air as driving power, applying the updated PLC technology to control automatically; presetting parameter, built-in self-diagnosis, alarm and LCD display function. Touch-screen is adopted human interface, friendly and visible which is easy to learn.

Heating tunnel

Preform heating structure is made up of three sets of heating tunnel in serials and one blower. Each heating tunnel has been installed with 8 pieces of far ultra red and quartz lighting tube which are distributed on each side of the heating tunnel.

Mould-closing device

It is located in the middle part of the machine and is composed of mould-closing cylinder, moving template and fixed template, etc. Two halves of the mould are fixed on the fixed template and moving template respectively.

PLC control system

PLC control system can watch on the preform temperature and if all the actions are finished according to the setting programs, if not, the system will stop automatically to avoid fault expanding. Besides, there are fault reason tips on the touch screen.

Blow structure

Thanks to adopting bottom-blow structure, the bottle mouth is always facing down to be prevented from the pollution of dust and dirtiness.

Air separation system

the blowing air and working air is separated from each other. . If the customer is able to use the clean blowing air, it will ensure the production of bottles clean at most.

Configuration：

PLC: MITSUBISHI

Interface & touch screen: MITSUBISHI or HITECH

Solenoid：BURKERT or EASUN

Pneumatic cylinder：FESTO or LINGTONG

Filter regulator/lubricator combination：FESTO or SHAKO

Electric component： SCHNEIDER or DELIXI

Sensor： OMRON or DELIXI

Inverter：ABB or DELIXI or DONGYUAN

Technical Specification:

ITEM	Unit	JSD-SJ	JSD-BJ
MAX Capacity	BPH	800	800
Bottle volume	L	0.2-2.5	1-5
Neck diameter	mm	Ф28—Ф63	Ф110—Ф130
Bottle diameter	mm	Ф130	Ф160
Bottle height	mm	≦335	≦335
Moulding opening	mm	150	180
Space between cavities	mm	220	260
Clamping force	N	150	150
Length of stretching	mm	≦340	≦340
General power	KW	16.5/10	18.5/9
Temperature control section	zone	8	6
Voltage/phase/frequency		380V/3/50HZ	380V/3/50HZ
Main machine dimension	mm	2400(L)1550(W)2100(H)	2600(L)2000(W)2100(H)
Weight	Kg	2100	2500
Conveyor dimension	mm	2030(L)2000(W)2500(H)	2030(L)2000(W)2500(H)
Conveyor weight	Kg	280	280

Product detail pictures:

Related Product Guide:

"Quality very first, Honesty as base, Sincere assistance and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for Factory wholesale Vacuum Pump Oil - Jar Automatic Blow Molding Machine – Joysun , The product will supply to all over the world, such as: Greece, Florida, Qatar, we have all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.

Carbonated Beverages Production Line