China Best quality Plastic Molding Machine - Fully Automatic Blowing Molding Machine – Joysun Suppliers and manufacturers

Best quality Plastic Molding Machine - Fully Automatic Blowing Molding Machine – Joysun

Short Description:

With the capacity of 2000-4000 per hour, Small bottle automatic blow molding machine can blow the bottles of the volume less than 2L, and the bottle diameter fromФ28—Ф30. Features: Automatic blow molding machine is designed uniquely with the innovative and reasonable mechanical structure. During the whole producing process, the bottles mouth faces down to avoid being overheated in the process of heating, which extends the application widely used. We adopt the cheap compressed air as driving ...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

To be a result of ours specialty and repair consciousness, our corporation has won an excellent reputation amongst customers all around the entire world for Vertical Injection Molding Machine , 5 Gallon Water Filling Machine , Vacuum Pump Oil , Our ultimate target is usually to rank as a top brand also to lead as a pioneer in our field. We are sure our profitable experience in tool generation will gain customer's trust, Wish to co-operate and co-create a far better foreseeable future with you!

Best quality Plastic Molding Machine - Fully Automatic Blowing Molding Machine – Joysun Detail:

With the capacity of 2000-4000 per hour, Small bottle automatic blow molding machine can blow the bottles of the volume less than 2L, and the bottle diameter fromФ28—Ф30.

Features:

Automatic blow molding machine is designed uniquely with the innovative and reasonable mechanical structure. During the whole producing process, the bottles mouth faces down to avoid being overheated in the process of heating, which extends the application widely used. We adopt the cheap compressed air as driving power, applying the updated PLC technology to control automatically; presetting parameter, built-in self-diagnosis, alarm and LCD display function. Touch-screen is adopted human interface, friendly and visible which is easy to learn.

Preform up structure

The up one is to control the action of preform conveying structure. If there are too many preforms in the tunnel, the moving will be stopped; if not enough, it will get preforms automatically from preform conveying structure.

Heating tunnel

Preform heating structure is made up of three sets of heating tunnel in serials and one blower. Each heating tunnel has been installed with 8 pieces of far ultra red and quartz lighting tube which are distributed on each side of the heating tunnel.

Mould-closing device

It is located in the middle part of the machine and is composed of mould-closing cylinder, moving template and fixed template, etc. Two halves of the mould are fixed on the fixed template and moving template respectively.

PLC control system

PLC control system can watch on the preform temperature and if all the actions are finished according to the setting programs, if not, the system will stop automatically to avoid fault expanding. Besides, there are fault reason tips on the touch screen.

Blow structure

Thanks to adopting bottom-blow structure, the bottle mouth is always facing down to be prevented from the pollution of dust and dirtiness.

Air separation system

the blowing air and working air is separated from each other. . If the customer is able to use the clean blowing air, it will ensure the production of bottles clean at most.

Configuration：

PLC: MITSUBISHI

Interface & touch screen: MITSUBISHI or HITECH

Solenoid：BURKERT or EASUN

Pneumatic cylinder：FESTO or LINGTONG

Filter regulator/lubricator combination：FESTO or SHAKO

Electric component： SCHNEIDER or DELIXI

Sensor： OMRON or DELIXI

Inverter：ABB or DELIXI or DONGYUAN

Technical Specification:

ITEM	Unit	JSD-Ⅱ	JSD-Ⅳ	JSD-Ⅵ
MAX Capacity	BPH	2000	3500	4800
Bottle volume	L	0．2—2．0	0．2—2．0	0．2—1.5
Neck diameter	mm	Ф28—Ф30	Ф28—Ф30	Ф28—Ф30
Bottle diameter	mm	Ф20—Ф100	Ф20—Ф100	Ф20—Ф100
Bottle height	mm	≦335	≦320	≦320
Mould cavity		2	4	6
Moulding opening	mm	150	140	150
Space between cavities	mm	128	190	190
Clamping force	N	150	300	450
Length of stretching	mm	≦340	≦340	≦340
General power	KW	16.5/10	24.5/16	33/22
Temperature control section	zone	8	8	8
Voltage/phase/frequency		380V/3/50HZ	380V/3/50HZ	380V/3/50HZ
Main machine dimension	mm	2900(L)2000(W)2100(H)	2950(L)2000(W)2100(H)	4300(L)2150(W)2100(H)
Weight	Kg	2600	2900	4500
Conveyor dimension	mm	2030(L)2000(W)2500(H)	2030(L)2000(W)2500(H)	2030(L)2000(W)2500(H)
Conveyor weight	Kg	280	280	280

Product detail pictures:

Related Product Guide:

We emphasize progress and introduce new merchandise into the market each and every year for Best quality Plastic Molding Machine - Fully Automatic Blowing Molding Machine – Joysun , The product will supply to all over the world, such as: Brisbane, Thailand, Netherlands, Now we have a excellent team supplying specialist service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We have been sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy with you. We also warmly welcome customers to visit our company and purchase our solutions.

Bottle Blowing Plastic Machine

Injection Machine Plastic

Plastic Bottle Blow Molding Machine

Plastic Injection Blow Molding Machine

Plastic Injection Molding Machine

Plastic Making Machine

Plastic Molding Machine

Plastic Product Blow Molding Machine

Semi Auto Plastic Injection Molding Machine

Small Plastic Injection Molding Machine

The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!